Ordering no:
Male panel mount connector, back-panel mount
Male panel mount connector, back-panel mount, Series 623
Available numbers of contacts
99 4637 80 06
M23 male panel mount connector, Contacts: 6, Shielding is not possible, solder, IP67
M23, series 623, Power connectors
| Order number |
99 4637 80 06
|
| Connector locking system | bolted |
| Termination | solder |
| Arrangement of contacts | clockwise |
| Wire gauge (mm) | 2,50 mm² |
| Wire gauge (AWG) | 14 |
| Degree of protection | IP67 |
| Mechanical operation | > 50 Mating cycles |
| Upper limit temperature | 125 °C |
| Lower limit temperature | -20 °C |
| Rated current (40 °C) | 20 A |
| Rated voltage | 300 V |
| Rated impulse voltage | 2500 V |
| Pollution degree | 3 |
| Overvoltage category | II |
| Insulating material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| Contact body material | PBT/PA66 |
| Customs tariff number | 85369010 |
| Weight (g) | 34 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Downloads
Data sheet
99 4603 81 09
M23 male panel mount connector, Contacts: 9, Shielding is not possible, solder, IP67
M23, series 623, Power connectors
| Order number |
99 4603 81 09
|
| Connector locking system | bolted |
| Termination | solder |
| Arrangement of contacts | left-handed |
| Wire gauge (mm) | 8x1,5/ 1x2,5 mm² |
| Wire gauge (AWG) | 8x16/1x14 |
| Degree of protection | IP67 |
| Mechanical operation | > 50 Mating cycles |
| Upper limit temperature | 125 °C |
| Lower limit temperature | -20 °C |
| Rated current (40 °C) | 8 x 8 A / 1 x 20 A |
| Rated voltage | 300 V |
| Rated impulse voltage | 2500 V |
| Pollution degree | 3 |
| Overvoltage category | II |
| Insulating material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| Contact body material | PBT/PA66 |
| Customs tariff number | 85369010 |
| Weight (g) | 32.5 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
99 4603 80 09
M23 male panel mount connector, Contacts: 9, Shielding is not possible, solder, IP67
M23, series 623, Power connectors
| Order number |
99 4603 80 09
|
| Connector locking system | bolted |
| Termination | solder |
| Arrangement of contacts | clockwise |
| Wire gauge (mm) | 8x1,5/ 1x2,5 mm² |
| Wire gauge (AWG) | 8x16/1x14 |
| Degree of protection | IP67 |
| Mechanical operation | > 50 Mating cycles |
| Upper limit temperature | 125 °C |
| Lower limit temperature | -20 °C |
| Rated current (40 °C) | 8 x 8 A / 1 x 20 A |
| Rated voltage | 300 V |
| Rated impulse voltage | 2500 V |
| Pollution degree | 3 |
| Overvoltage category | II |
| Insulating material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| Contact body material | PBT/PA66 |
| Customs tariff number | 85369010 |
| Weight (g) | 32.5 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
99 4607 81 12
M23 male panel mount connector, Contacts: 12, Shielding is not possible, solder, IP67
M23, series 623, Power connectors
| Order number |
99 4607 81 12
|
| Connector locking system | bolted |
| Termination | solder |
| Arrangement of contacts | left-handed |
| Wire gauge (mm) | 1,00 mm² |
| Wire gauge (AWG) | 18 |
| Degree of protection | IP67 |
| Mechanical operation | > 50 Mating cycles |
| Upper limit temperature | 125 °C |
| Lower limit temperature | -20 °C |
| Rated current (40 °C) | 8 A |
| Rated voltage | 150 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 3 |
| Overvoltage category | II |
| Insulating material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| Contact body material | PBT/PA66 |
| Customs tariff number | 85369010 |
| Weight (g) | 32 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
99 4607 80 12
M23 male panel mount connector, Contacts: 12, Shielding is not possible, solder, IP67
M23, series 623, Power connectors
| Order number |
99 4607 80 12
|
| Connector locking system | bolted |
| Termination | solder |
| Arrangement of contacts | clockwise |
| Wire gauge (mm) | 1,00 mm² |
| Wire gauge (AWG) | 18 |
| Degree of protection | IP67 |
| Mechanical operation | > 50 Mating cycles |
| Upper limit temperature | 125 °C |
| Lower limit temperature | -20 °C |
| Rated current (40 °C) | 8 A |
| Rated voltage | 150 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 3 |
| Overvoltage category | II |
| Insulating material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| Contact body material | PBT/PA66 |
| Customs tariff number | 85369010 |
| Weight (g) | 32.452 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
99 4611 80 16
M23 male panel mount connector, Contacts: 16, Shielding is not possible, solder, IP67
M23, series 623, Power connectors
| Order number |
99 4611 80 16
|
| Connector locking system | bolted |
| Termination | solder |
| Arrangement of contacts | clockwise |
| Wire gauge (mm) | 1,00 mm² |
| Wire gauge (AWG) | 18 |
| Degree of protection | IP67 |
| Mechanical operation | > 50 Mating cycles |
| Upper limit temperature | 125 °C |
| Lower limit temperature | -20 °C |
| Rated current (40 °C) | 8 A |
| Rated voltage | 150 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 3 |
| Overvoltage category | II |
| Insulating material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| Contact body material | PBT/PA66 |
| Customs tariff number | 85369010 |
| Weight (g) | 33.682 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
99 4633 80 19
M23 male panel mount connector, Contacts: 19, Shielding is not possible, solder, IP67
M23, series 623, Power connectors
| Order number |
99 4633 80 19
|
| Connector locking system | bolted |
| Termination | solder |
| Arrangement of contacts | clockwise |
| Wire gauge (mm) | 16x1,0/ 3x1,5 mm² |
| Wire gauge (AWG) | 16x18/ 3x16 |
| Degree of protection | IP67 |
| Mechanical operation | > 50 Mating cycles |
| Upper limit temperature | 125 °C |
| Lower limit temperature | -20 °C |
| Rated current (40 °C) | 16 x 8 A / 3 x 10 A |
| Rated voltage | 150 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 3 |
| Overvoltage category | II |
| Insulating material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| Contact body material | PBT/PA66 |
| Customs tariff number | 85369010 |
| Weight (g) | 33.5 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Downloads
Data sheet
Contact to customer service
Do you have any questions regarding our products or do you wish an individual offer?