Ordering no:
Female panel mount connector, red, solder
Female panel mount connector, red, solder, Series 720 MED
Available numbers of contacts
99 9108 50 03
Snap-In IP67, miniature female panel mount connector, Contacts: 3, not shielded, solder, IP67
Snap In, series 720, Connectors for medical applications
| Order number |
99 9108 50 03
|
| Connector locking system | snap |
| Termination | solder |
| Wire gauge (mm) | 0,75 mm² |
| Wire gauge (AWG) | 20 |
| Degree of protection | IP67 |
| Mechanical operation | > 500 Mating cycles |
| Upper limit temperature | 85 °C |
| Lower limit temperature | -25 °C |
| Rated current (40 °C) | 7 A |
| Rated voltage | 250 V |
| Rated impulse voltage | 2500 V |
| Pollution degree | 2 |
| Overvoltage category | II |
| Insulating material group | II |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| Contact body material | PA (UL 94 V-0) |
| Housing material | PA |
| Customs tariff number | 85369010 |
| Weight (g) | 5.42 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Downloads
Data sheet
Certificates
CAD files
99 9116 50 05
Snap-In IP67, miniature female panel mount connector, Contacts: 5, not shielded, solder, IP67
Snap In, series 720, Connectors for medical applications
| Order number |
99 9116 50 05
|
| Connector locking system | snap |
| Termination | solder |
| Wire gauge (mm) | 0,75 mm² |
| Wire gauge (AWG) | 20 |
| Degree of protection | IP67 |
| Mechanical operation | > 500 Mating cycles |
| Upper limit temperature | 85 °C |
| Lower limit temperature | -25 °C |
| Rated current (40 °C) | 5 A |
| Rated voltage | 125 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 2 |
| Overvoltage category | II |
| Insulating material group | II |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| Contact body material | PA (UL 94 V-0) |
| Housing material | PA |
| Customs tariff number | 85369010 |
| Weight (g) | 6.285 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Downloads
Data sheet
Certificates
CAD files
99 9128 50 08
Snap-In IP67, miniature female panel mount connector, Contacts: 8, not shielded, solder, IP67
Snap In, series 720, Connectors for medical applications
| Order number |
99 9128 50 08
|
| Connector locking system | snap |
| Termination | solder |
| Wire gauge (mm) | 0,25 mm² |
| Wire gauge (AWG) | 24 |
| Degree of protection | IP67 |
| Mechanical operation | > 500 Mating cycles |
| Upper limit temperature | 85 °C |
| Lower limit temperature | -25 °C |
| Rated current (40 °C) | 2 A |
| Rated voltage | 125 V |
| Rated impulse voltage | 2500 V |
| Pollution degree | 2 |
| Overvoltage category | II |
| Insulating material group | II |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| Contact body material | PA (UL 94 V-0) |
| Housing material | PA |
| Customs tariff number | 85369010 |
| Weight (g) | 5.549 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Downloads
Data sheet
Certificates
CAD files
99 9136 50 12
Snap-In IP67, miniature female panel mount connector, Contacts: 12, not shielded, solder, IP67
Snap In, series 720, Connectors for medical applications
| Order number |
99 9136 50 12
|
| Connector locking system | snap |
| Termination | solder |
| Wire gauge (mm) | 0,25 mm² |
| Wire gauge (AWG) | 24 |
| Degree of protection | IP67 |
| Mechanical operation | > 500 Mating cycles |
| Upper limit temperature | 85 °C |
| Lower limit temperature | -25 °C |
| Rated current (40 °C) | 2 A |
| Rated voltage | 60 V |
| Rated impulse voltage | 800 V |
| Pollution degree | 2 |
| Overvoltage category | II |
| Insulating material group | II |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| Contact body material | PA (UL 94 V-0) |
| Housing material | PA |
| Customs tariff number | 85369010 |
| Weight (g) | 6.254 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Downloads
Data sheet
Certificates
CAD files
Contact to customer service
Do you have any questions regarding our products or do you wish an individual offer?